Step on enable FZ10 display on TV/LCD while recording/capture
|
| Forum | Panasonic Talk |
| Subject | Step on enable FZ10 display on TV/LCD while recording/capture [SIMILAR] |
| Posted by | davwon [PROFILE] [GALLERY] |
| Date/Time | 22:08:28, 29 March 2004 (GMT) |
| |
|
I found this step from my bro.
1. With the FZ10 in stand-by mode or power off, set the dail to 'P' mode. then switch On the power while at the same time holding down the '^'(up) and 'Brust Mode' buttons.
2. Switch the FZ10 to Playback mode, and press '^'(up) & the 'Burst Mode' button at the same time.(You'll hear a beep)
3. Switch back to 'P' Mode. Then turn of the power while pressing the 'Menu' and '>'(right) buttong at the same time.
4. When the setting screen appears, use the 'v'(down) button to select 'USA'. Press '>'(right) to set.
The TV/LCD will now display whatever is shown in the FZ10 viewfinder or LCD screen.
Hope this will give FZ10 some extra point to be consider. ^_^
--
David Wong from MY
PanaFan; DMC-FZ1, DMC-FZ2, DMC-FZ10, DMC-F1, DMC-F7, DMC-FX5, DMC-LC5, DMC-LC33,DMC-LC43, DMC-LC20, SV-AV20, SV-AV100 & SV-AS10
|
|
| Message | |
|  |
| Navigation | |< First < Previous |
|
Below is the navigator for this thread, you can use this to view
other messages in this thread. You can use the previous and next buttons to scroll
through the messages in this thread. Or the 'Next New' button to jump to the next
newly posted message.
Shortcut keys:
fForum
nNext
wNext new
rReply
qQuote
